PolarDiagram defines a common polar diagram. More...

#include <KDChartPolarDiagram.h>

Inheritance diagram for KDChart::PolarDiagram:

Collaboration diagram for KDChart::PolarDiagram:

Signals
void	aboutToBeDestroyed ()
	This signal is emitted when this diagram is being destroyed, but before all the data, i.e.
void	dataHidden ()
	This signal is emitted, when the hidden status of at least one data cell was (un)set.
void	layoutChanged (AbstractDiagram *)
	Diagrams are supposed to emit this signal, when the layout of one of their element changes.
void	modelDataChanged ()
	This signal is emitted, when the model data is changed.
void	modelsChanged ()
	This signal is emitted, when either the model or the AttributesModel is replaced.
void	propertiesChanged ()
	Emitted upon change of a property of the Diagram.
void	viewportCoordinateSystemChanged ()
	Emitted upon change of the view coordinate system.
Public Member Functions
bool	allowOverlappingDataValueTexts () const
bool	antiAliasing () const
virtual AttributesModel *	attributesModel () const
	Returns the AttributesModel, that is used by this diagram.
QBrush	brush () const
	Retrieve the brush to be used for painting datapoints globally.
QBrush	brush (const QModelIndex &index) const
	Retrieve the brush to be used, for painting the datapoint at the given index in the model.
QBrush	brush (int dataset) const
	Retrieve the brush to be used for the given dataset.
virtual PolarDiagram *	clone () const
	Creates an exact copy of this diagram.
bool	closeDatasets () const
int	columnCount () const
bool	compare (const AbstractDiagram *other) const
	Returns true if both diagrams have the same settings.
AbstractCoordinatePlane *	coordinatePlane () const
	The coordinate plane associated with the diagram.
const QPair< QPointF, QPointF >	dataBoundaries () const
	Return the bottom left and top right data point, that the diagram will display (unless the grid adjusts these values).
virtual void	dataChanged (const QModelIndex &topLeft, const QModelIndex &bottomRight)
	[reimplemented]
QList< QBrush >	datasetBrushes () const
	The set of dataset brushes currently used, for use in legends, etc.
int	datasetDimension () const
	The dataset dimension of a diagram determines, how many value dimensions it expects each datapoint to have.
QStringList	datasetLabels () const
	The set of dataset labels currently displayed, for use in legends, etc.
QList< MarkerAttributes >	datasetMarkers () const
	The set of dataset markers currently used, for use in legends, etc.
QList< QPen >	datasetPens () const
	The set of dataset pens currently used, for use in legends, etc.
DataValueAttributes	dataValueAttributes () const
	Retrieve the DataValueAttributes specified globally.
DataValueAttributes	dataValueAttributes (int dataset) const
	Retrieve the DataValueAttributes for the given dataset.
DataValueAttributes	dataValueAttributes (const QModelIndex &index) const
	Retrieve the DataValueAttributes for the given index.
virtual void	doItemsLayout ()
	[reimplemented]
virtual int	horizontalOffset () const
	[reimplemented]
virtual QModelIndex	indexAt (const QPoint &point) const
	[reimplemented]
QModelIndexList	indexesAt (const QPoint &point) const
	This method is added alongside with indexAt from QAIM, since in kdchart multiple indexes can be displayed at the same spot.
bool	isHidden () const
	Retrieve the hidden status specified globally.
bool	isHidden (int dataset) const
	Retrieve the hidden status for the given dataset.
bool	isHidden (const QModelIndex &index) const
	Retrieve the hidden status for the given index.
virtual bool	isIndexHidden (const QModelIndex &index) const
	[reimplemented]
QStringList	itemRowLabels () const
	The set of item row labels currently displayed, for use in Abscissa axes, etc.
virtual QModelIndex	moveCursor (CursorAction cursorAction, Qt::KeyboardModifiers modifiers)
	[reimplemented]
virtual double	numberOfDatasets () const
virtual double	numberOfGridRings () const
	[reimplemented]
virtual double	numberOfValuesPerDataset () const
	[reimplemented]
virtual void	paint (PaintContext *paintContext, bool calculateListAndReturnScale, qreal &newZoomX, qreal &newZoomY)
void	paintDataValueText (QPainter *painter, const QModelIndex &index, const QPointF &pos, double value)
virtual void	paintMarker (QPainter *painter, const MarkerAttributes &markerAttributes, const QBrush &brush, const QPen &, const QPointF &point, const QSizeF &size)
void	paintMarker (QPainter *painter, const QModelIndex &index, const QPointF &pos)
void	paintMarker (QPainter *painter, const DataValueAttributes &a, const QModelIndex &index, const QPointF &pos)
QPen	pen () const
	Retrieve the pen to be used for painting datapoints globally.
QPen	pen (int dataset) const
	Retrieve the pen to be used for the given dataset.
QPen	pen (const QModelIndex &index) const
	Retrieve the pen to be used, for painting the datapoint at the given index in the model.
bool	percentMode () const
	Returns whether this diagram is drawn in percent mode.
const PolarCoordinatePlane *	polarCoordinatePlane () const
	PolarDiagram (QWidget parent=0, PolarCoordinatePlane plane=0)
virtual void	resize (const QSizeF &area)
	[reimplemented]
bool	rotateCircularLabels () const
int	rowCount () const
virtual void	scrollTo (const QModelIndex &index, ScrollHint hint=EnsureVisible)
	[reimplemented]
void	setAllowOverlappingDataValueTexts (bool allow)
	Set whether data value labels are allowed to overlap.
void	setAntiAliasing (bool enabled)
	Set whether anti-aliasing is to be used while rendering this diagram.
virtual void	setAttributesModel (AttributesModel *model)
	Associate an AttributesModel with this diagram.
void	setBrush (int dataset, const QBrush &brush)
	Set the brush to be used, for painting the given dataset.
void	setBrush (const QBrush &brush)
	Set the brush to be used, for painting all datasets in the model.
void	setBrush (const QModelIndex &index, const QBrush &brush)
	Set the brush to be used, for painting the datapoint at the given index.
void	setCloseDatasets (bool closeDatasets)
	Close each of the data series by connecting the last point to its respective start point.
virtual void	setCoordinatePlane (AbstractCoordinatePlane *plane)
	Set the coordinate plane associated with the diagram.
void	setDatasetDimension (int dimension)
void	setDataValueAttributes (const QModelIndex &index, const DataValueAttributes &a)
	Set the DataValueAttributes for the given index.
void	setDataValueAttributes (int dataset, const DataValueAttributes &a)
	Set the DataValueAttributes for the given dataset.
void	setDataValueAttributes (const DataValueAttributes &a)
	Set the DataValueAttributes for all datapoints in the model.
void	setHidden (bool hidden)
	Hide (or unhide, resp.) all datapoints in the model.
void	setHidden (const QModelIndex &index, bool hidden)
	Hide (or unhide, resp.) a data cell.
void	setHidden (int dataset, bool hidden)
	Hide (or unhide, resp.) a dataset.
virtual void	setModel (QAbstractItemModel *model)
	Associate a model with the diagram.
void	setPen (const QPen &pen)
	Set the pen to be used, for painting all datasets in the model.
void	setPen (const QModelIndex &index, const QPen &pen)
	Set the pen to be used, for painting the datapoint at the given index.
void	setPen (int dataset, const QPen &pen)
	Set the pen to be used, for painting the given dataset.
void	setPercentMode (bool percent)
	Deprecated method that turns the percent mode of this diagram on or off.
virtual void	setRootIndex (const QModelIndex &idx)
	Set the root index in the model, where the diagram starts referencing data for display.
void	setRotateCircularLabels (bool rotateCircularLabels)
virtual void	setSelection (const QRect &rect, QItemSelectionModel::SelectionFlags command)
	[reimplemented]
virtual void	setSelectionModel (QItemSelectionModel *selectionModel)
	Associate a seleection model with the diagrom.
void	setShowDelimitersAtPosition (Position position, bool showDelimiters)
void	setShowLabelsAtPosition (Position position, bool showLabels)
void	setUnitPrefix (const QString &prefix, int column, Qt::Orientation orientation)
	Set the unit prefix to be used on axes for one specific column.
void	setUnitPrefix (const QString &prefix, Qt::Orientation orientation)
	Set the unit prefix to be used on axes for all columns.
void	setUnitSuffix (const QString &suffix, Qt::Orientation orientation)
	Set the unit prefix to be used on axes for all columns.
void	setUnitSuffix (const QString &suffix, int column, Qt::Orientation orientation)
	Set the unit prefix to be used on axes for one specific column.
void	setZeroDegreePosition (int degrees)
bool	showDelimitersAtPosition (Position position) const
bool	showLabelsAtPosition (Position position) const
QString	unitPrefix (int column, Qt::Orientation orientation, bool fallback=false) const
	Retrieves the axis unit prefix for a specific column.
QString	unitPrefix (Qt::Orientation orientation) const
	Retrieves the axis unit prefix.
QString	unitSuffix (int column, Qt::Orientation orientation, bool fallback=false) const
	Retrieves the axis unit suffix for a specific column.
QString	unitSuffix (Qt::Orientation orientation) const
	Retrieves the axis unit suffix.
void	update () const
void	useDefaultColors ()
	Set the palette to be used, for painting datasets to the default palette.
void	useRainbowColors ()
	Set the palette to be used, for painting datasets to the rainbow palette.
virtual bool	usesExternalAttributesModel () const
	Returns whether the diagram is using its own built-in attributes model or an attributes model that was set via setAttributesModel.
void	useSubduedColors ()
	Set the palette to be used, for painting datasets to the subdued palette.
virtual double	valueTotals () const
	[reimplemented]
virtual int	verticalOffset () const
	[reimplemented]
virtual QRect	visualRect (const QModelIndex &index) const
	[reimplemented]
virtual QRegion	visualRegion (const QModelIndex &index) const
virtual QRegion	visualRegionForSelection (const QItemSelection &selection) const
	[reimplemented]
int	zeroDegreePosition () const
virtual	~PolarDiagram ()
Protected Slots
void	setDataBoundariesDirty () const
Protected Member Functions
QModelIndex	attributesModelRootIndex () const
virtual const QPair< QPointF, QPointF >	calculateDataBoundaries () const
	[reimplemented]
virtual bool	checkInvariants (bool justReturnTheStatus=false) const
virtual void	paint (PaintContext *paintContext)
	[reimplemented]
virtual void	paintDataValueTexts (QPainter *painter)
void	paintEvent (QPaintEvent *)
virtual void	paintMarkers (QPainter *painter)
virtual void	paintPolarMarkers (PaintContext *ctx, const QPolygonF &polygon)
void	resizeEvent (QResizeEvent *)
void	setAttributesModelRootIndex (const QModelIndex &)
void	setDatasetDimensionInternal (int dimension)
double	valueForCell (int row, int column) const
	Helper method, retrieving the data value (DisplayRole) for a given row and column.

Detailed Description

PolarDiagram defines a common polar diagram.

Definition at line 39 of file KDChartPolarDiagram.h.

Constructor & Destructor Documentation

PolarDiagram::PolarDiagram	(	QWidget *	parent = `0`,
		PolarCoordinatePlane *	plane = `0`
	)		`[explicit]`

Definition at line 46 of file KDChartPolarDiagram.cpp.

Referenced by clone().

PolarDiagram::~PolarDiagram ( ) [virtual]

Definition at line 52 of file KDChartPolarDiagram.cpp.

Member Function Documentation

void KDChart::AbstractDiagram::aboutToBeDestroyed ( ) [signal, inherited]

This signal is emitted when this diagram is being destroyed, but before all the data, i.e.

the attributes model, is invalidated.

Referenced by KDChart::AbstractDiagram::~AbstractDiagram().

bool AbstractDiagram::allowOverlappingDataValueTexts ( ) const [inherited]

Returns:: Whether data value labels are allowed to overlap.

Definition at line 491 of file KDChartAbstractDiagram.cpp.

References d.

Referenced by KDChart::AbstractDiagram::compare().

bool AbstractDiagram::antiAliasing ( ) const [inherited]

Returns:: Whether anti-aliasing is to be used for rendering this diagram.

Definition at line 502 of file KDChartAbstractDiagram.cpp.

References d.

Referenced by KDChart::AbstractDiagram::compare().

AttributesModel * AbstractDiagram::attributesModel ( ) const [virtual, inherited]

Returns the AttributesModel, that is used by this diagram.

By default each diagram owns its own AttributesModel, which should never be deleted. Only if a user-supplied AttributesModel has been set does the pointer returned here not belong to the diagram.

Returns:: The AttributesModel associated with the diagram.

See also:: setAttributesModel

Returns:: a pointer to the AttributesModel currently used by this diagram.

Definition at line 317 of file KDChartAbstractDiagram.cpp.

References d.

QModelIndex AbstractDiagram::attributesModelRootIndex ( ) const [protected, inherited]

returns a QModelIndex pointing into the AttributesModel that corresponds to the root index of the diagram.

Definition at line 347 of file KDChartAbstractDiagram.cpp.

References d.

Referenced by KDChart::AbstractDiagram::datasetBrushes(), KDChart::AbstractDiagram::datasetLabels(), KDChart::AbstractDiagram::datasetMarkers(), KDChart::AbstractDiagram::datasetPens(), KDChart::AbstractDiagram::itemRowLabels(), KDChart::Plotter::numberOfAbscissaSegments(), KDChart::LineDiagram::numberOfAbscissaSegments(), KDChart::BarDiagram::numberOfAbscissaSegments(), KDChart::Plotter::numberOfOrdinateSegments(), KDChart::LineDiagram::numberOfOrdinateSegments(), KDChart::BarDiagram::numberOfOrdinateSegments(), KDChart::AbstractDiagram::valueForCell(), and KDChart::LineDiagram::valueForCellTesting().

QBrush AbstractDiagram::brush ( int dataset ) const [inherited]

Retrieve the brush to be used for the given dataset.

This will fall back automatically to what was set at model level, if there are no dataset specific settings.

Parameters:

dataset The dataset to retrieve the brush for.

Returns:: The brush to use for painting.

Definition at line 794 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::brush(), d, and KDChart::DatasetBrushRole.

QBrush AbstractDiagram::brush ( const QModelIndex & index ) const [inherited]

Retrieve the brush to be used, for painting the datapoint at the given index in the model.

Parameters:

index The index of the datapoint in the model. With a dataset dimension of two, this is the index of the key of each key/value pair.

Returns:: The brush to use for painting.

Definition at line 802 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::AttributesModel::data(), and KDChart::DatasetBrushRole.

QBrush AbstractDiagram::brush ( ) const [inherited]

Retrieve the brush to be used for painting datapoints globally.

This will fall back automatically to the default settings, if there are no specific settings.

Returns:: The brush to use for painting.

Definition at line 788 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::AttributesModel::data(), and KDChart::DatasetBrushRole.

Referenced by KDChart::AbstractDiagram::brush(), KDChart::AbstractDiagram::datasetBrushes(), KDChart::TernaryPointDiagram::paint(), KDChart::TernaryLineDiagram::paint(), paint(), and KDChart::AbstractDiagram::paintMarker().

const QPair< QPointF, QPointF > PolarDiagram::calculateDataBoundaries ( ) const [protected, virtual]

[reimplemented]

Implements KDChart::AbstractDiagram.

Definition at line 98 of file KDChartPolarDiagram.cpp.

References KDChart::AbstractDiagram::checkInvariants(), and KDChart::AbstractPolarDiagram::rowCount().

bool AbstractDiagram::checkInvariants ( bool justReturnTheStatus = false ) const [protected, virtual, inherited]

Definition at line 1029 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::coordinatePlane().

Referenced by KDChart::RingDiagram::calculateDataBoundaries(), calculateDataBoundaries(), KDChart::Plotter::calculateDataBoundaries(), KDChart::PieDiagram::calculateDataBoundaries(), KDChart::LineDiagram::calculateDataBoundaries(), KDChart::BarDiagram::calculateDataBoundaries(), KDChart::RingDiagram::paint(), paint(), KDChart::Plotter::paint(), KDChart::LineDiagram::paint(), KDChart::LeveyJenningsDiagram::paint(), KDChart::BarDiagram::paint(), KDChart::AbstractDiagram::paintDataValueTexts(), KDChart::PieDiagram::paintInternal(), KDChart::AbstractDiagram::paintMarker(), and KDChart::AbstractDiagram::paintMarkers().

PolarDiagram * PolarDiagram::clone ( ) const [virtual]

Creates an exact copy of this diagram.

Definition at line 87 of file KDChartPolarDiagram.cpp.

References closeDatasets(), d, PolarDiagram(), rotateCircularLabels(), showDelimitersAtPosition(), and showLabelsAtPosition().

bool PolarDiagram::closeDatasets ( ) const

Definition at line 284 of file KDChartPolarDiagram.cpp.

References d.

Referenced by clone(), paint(), and setCloseDatasets().

int AbstractPolarDiagram::columnCount ( ) const [inherited]

Definition at line 57 of file KDChartAbstractPolarDiagram.cpp.

References KDChart::AbstractPolarDiagram::numberOfValuesPerDataset().

Referenced by KDChart::RingDiagram::calculateDataBoundaries(), KDChart::PieDiagram::calculateDataBoundaries(), KDChart::RingDiagram::paint(), KDChart::PieDiagram::paintInternal(), KDChart::RingDiagram::valueTotals(), and KDChart::PieDiagram::valueTotals().

bool AbstractDiagram::compare ( const AbstractDiagram * other ) const [inherited]

Returns true if both diagrams have the same settings.

Definition at line 129 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::allowOverlappingDataValueTexts(), KDChart::AbstractDiagram::antiAliasing(), KDChart::AbstractDiagram::attributesModel(), KDChart::AttributesModel::compare(), KDChart::AbstractDiagram::datasetDimension(), and KDChart::AbstractDiagram::percentMode().

AbstractCoordinatePlane * AbstractDiagram::coordinatePlane ( ) const [inherited]

The coordinate plane associated with the diagram.

This determines how coordinates in value space are mapped into pixel space. By default this is a CartesianCoordinatePlane.

Returns:: The coordinate plane associated with the diagram.

Definition at line 220 of file KDChartAbstractDiagram.cpp.

References d.

Referenced by KDChart::LineDiagram::calculateDataBoundaries(), KDChart::BarDiagram::calculateDataBoundaries(), KDChart::AbstractDiagram::checkInvariants(), KDChart::LeveyJenningsDiagram::iconRect(), KDChart::AbstractCartesianDiagram::layoutPlanes(), paint(), KDChart::AbstractDiagram::paintDataValueTexts(), KDChart::AbstractDiagram::paintMarkers(), KDChart::AbstractPolarDiagram::polarCoordinatePlane(), KDChart::Plotter::resize(), KDChart::LineDiagram::resize(), KDChart::BarDiagram::resize(), and KDChart::AbstractCartesianDiagram::setCoordinatePlane().

const QPair< QPointF, QPointF > AbstractDiagram::dataBoundaries ( ) const [inherited]

Return the bottom left and top right data point, that the diagram will display (unless the grid adjusts these values).

This method returns a chached result of calculations done by calculateDataBoundaries. Classes derived from AbstractDiagram must implement the calculateDataBoundaries function, to specify their own way of calculating the data boundaries. If derived classes want to force recalculation of the data boundaries, they can call setDataBoundariesDirty()

Returned value is in diagram coordinates.

Definition at line 225 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::calculateDataBoundaries(), and d.

Referenced by KDChart::CartesianCoordinatePlane::getRawDataBoundingRectFromDiagrams(), KDChart::PolarCoordinatePlane::layoutDiagrams(), KDChart::Plotter::paint(), KDChart::LineDiagram::paint(), KDChart::LeveyJenningsDiagram::paint(), and KDChart::BarDiagram::paint().

void AbstractDiagram::dataChanged	(	const QModelIndex &	topLeft,
		const QModelIndex &	bottomRight
	)		`[virtual, inherited]`

[reimplemented]

Definition at line 368 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::setDataBoundariesDirty().

Referenced by KDChart::LeveyJenningsDiagram::setModel(), and KDChart::AbstractDiagram::setModel().

void KDChart::AbstractDiagram::dataHidden ( ) [signal, inherited]

This signal is emitted, when the hidden status of at least one data cell was (un)set.

Referenced by KDChart::AbstractDiagram::setHidden().

QList< QBrush > AbstractDiagram::datasetBrushes ( ) const [inherited]

The set of dataset brushes currently used, for use in legends, etc.

Note:: Cell-level override brushes, if set, take precedence over the dataset values, so you might need to check these too, in order to find the brush, that is used for a single cell.

Returns:: The current set of dataset brushes.

Definition at line 990 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::AbstractDiagram::attributesModelRootIndex(), KDChart::AbstractDiagram::brush(), KDChart::AttributesModel::columnCount(), and KDChart::AbstractDiagram::datasetDimension().

Referenced by KDChart::Legend::datasetCount(), KDChart::Legend::removeDiagram(), and KDChart::Legend::setBrushesFromDiagram().

int AbstractDiagram::datasetDimension ( ) const [inherited]

The dataset dimension of a diagram determines, how many value dimensions it expects each datapoint to have.

For each dimension it will expect one column of values in the model. If the dimensionality is 1, automatic values will be used for the abscissa.

For example a diagram with the default dimension of 1, will have one column per datapoint (the y values) and will use automatic values for the x axis (1, 2, 3, ... n). If the dimension is 2, the diagram will use the first, (and the third, fifth, etc) columns as X values, and the second, (and the fourth, sixth, etc) column as Y values.

Returns:: The dataset dimension of the diagram.

Definition at line 1041 of file KDChartAbstractDiagram.cpp.

References d.

Referenced by KDChart::AbstractDiagram::compare(), KDChart::AbstractDiagram::datasetBrushes(), KDChart::AbstractDiagram::datasetLabels(), KDChart::AbstractDiagram::datasetMarkers(), KDChart::AbstractDiagram::datasetPens(), KDChart::LineDiagram::getCellValues(), KDChart::CartesianCoordinatePlane::getDataDimensionsList(), KDChart::TernaryPointDiagram::paint(), KDChart::TernaryLineDiagram::paint(), KDChart::AbstractDiagram::paintDataValueTexts(), KDChart::AbstractDiagram::paintMarkers(), KDChart::Plotter::setType(), and KDChart::LineDiagram::setType().

QStringList AbstractDiagram::datasetLabels ( ) const [inherited]

The set of dataset labels currently displayed, for use in legends, etc.

Returns:: The set of dataset labels currently displayed.

Definition at line 977 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::AbstractDiagram::attributesModelRootIndex(), KDChart::AttributesModel::columnCount(), KDChart::AbstractDiagram::datasetDimension(), and KDChart::AttributesModel::headerData().

Referenced by KDChart::Legend::datasetCount().

QList< MarkerAttributes > AbstractDiagram::datasetMarkers ( ) const [inherited]

The set of dataset markers currently used, for use in legends, etc.

Note:: Cell-level override markers, if set, take precedence over the dataset values, so you might need to check these too, in order to find the marker, that is shown for a single cell.

Returns:: The current set of dataset brushes.

Definition at line 1016 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::AbstractDiagram::attributesModelRootIndex(), KDChart::AttributesModel::columnCount(), KDChart::AbstractDiagram::datasetDimension(), KDChart::AbstractDiagram::dataValueAttributes(), and KDChart::DataValueAttributes::markerAttributes().

QList< QPen > AbstractDiagram::datasetPens ( ) const [inherited]

The set of dataset pens currently used, for use in legends, etc.

Note:: Cell-level override pens, if set, take precedence over the dataset values, so you might need to check these too, in order to find the pens, that is used for a single cell.

Returns:: The current set of dataset pens.

Definition at line 1003 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::AbstractDiagram::attributesModelRootIndex(), KDChart::AttributesModel::columnCount(), KDChart::AbstractDiagram::datasetDimension(), and KDChart::AbstractDiagram::pen().

Referenced by KDChart::Legend::removeDiagram().

DataValueAttributes AbstractDiagram::dataValueAttributes ( ) const [inherited]

Retrieve the DataValueAttributes specified globally.

This will fall back automatically to the default settings, if there are no specific settings.

Returns:: The global DataValueAttributes.

Definition at line 445 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::DataValueLabelAttributesRole, and KDChart::AttributesModel::modelData().

Referenced by KDChart::AbstractDiagram::datasetMarkers(), KDChart::AbstractDiagram::dataValueAttributes(), KDChart::TernaryPointDiagram::paint(), KDChart::TernaryLineDiagram::paint(), KDChart::AbstractDiagram::paintMarker(), and KDChart::TernaryLineDiagram::TernaryLineDiagram().

DataValueAttributes AbstractDiagram::dataValueAttributes ( int dataset ) const [inherited]

Retrieve the DataValueAttributes for the given dataset.

This will fall back automatically to what was set at model level, if there are no dataset specific settings.

Parameters:

dataset The dataset to retrieve the attributes for.

Returns:: The DataValueAttributes for the given dataset.

Definition at line 451 of file KDChartAbstractDiagram.cpp.

References d, KDChart::AbstractDiagram::dataValueAttributes(), and KDChart::DataValueLabelAttributesRole.

DataValueAttributes AbstractDiagram::dataValueAttributes ( const QModelIndex & index ) const [inherited]

Retrieve the DataValueAttributes for the given index.

This will fall back automatically to what was set at dataset or model level, if there are no datapoint specific settings.

Parameters:

index The datapoint to retrieve the attributes for. With a dataset dimension of two, this is the index of the key of each key/value pair.

Returns:: The DataValueAttributes for the given index.

Definition at line 471 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::AttributesModel::data(), and KDChart::DataValueLabelAttributesRole.

void AbstractDiagram::doItemsLayout ( ) [virtual, inherited]

[reimplemented]

Definition at line 359 of file KDChartAbstractDiagram.cpp.

References d, and KDChart::AbstractDiagram::update().

int AbstractDiagram::horizontalOffset ( ) const [virtual, inherited]

[reimplemented]

Definition at line 910 of file KDChartAbstractDiagram.cpp.

QModelIndex AbstractDiagram::indexAt ( const QPoint & point ) const [virtual, inherited]

[reimplemented]

Definition at line 1075 of file KDChartAbstractDiagram.cpp.

References d.

QModelIndexList AbstractDiagram::indexesAt ( const QPoint & point ) const [inherited]

This method is added alongside with indexAt from QAIM, since in kdchart multiple indexes can be displayed at the same spot.

Definition at line 1080 of file KDChartAbstractDiagram.cpp.

References d.

bool AbstractDiagram::isHidden ( ) const [inherited]

Retrieve the hidden status specified globally.

This will fall back automatically to the default settings ( = not hidden), if there are no specific settings.

Returns:: The global hidden status.

Definition at line 405 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::DataHiddenRole, and KDChart::AttributesModel::modelData().

Referenced by KDChart::AbstractDiagram::isHidden(), and KDChart::LineDiagram::valueForCellTesting().

bool AbstractDiagram::isHidden ( int dataset ) const [inherited]

Retrieve the hidden status for the given dataset.

This will fall back automatically to what was set at diagram level, if there are no dataset specific settings.

Parameters:

dataset The dataset to retrieve the hidden status for.

Returns:: The hidden status for the given dataset.

Definition at line 411 of file KDChartAbstractDiagram.cpp.

References d, KDChart::DataHiddenRole, and KDChart::AbstractDiagram::isHidden().

bool AbstractDiagram::isHidden ( const QModelIndex & index ) const [inherited]

Retrieve the hidden status for the given index.

This will fall back automatically to what was set at dataset or diagram level, if there are no datapoint specific settings.

Parameters:

index The datapoint to retrieve the hidden status for.

Returns:: The hidden status for the given index.

Definition at line 419 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::AttributesModel::data(), and KDChart::DataHiddenRole.

bool AbstractDiagram::isIndexHidden ( const QModelIndex & index ) const [virtual, inherited]

[reimplemented]

Definition at line 916 of file KDChartAbstractDiagram.cpp.

QStringList AbstractDiagram::itemRowLabels ( ) const [inherited]

The set of item row labels currently displayed, for use in Abscissa axes, etc.

Returns:: The set of item row labels currently displayed.

Definition at line 961 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::AbstractDiagram::attributesModelRootIndex(), KDChart::AttributesModel::headerData(), KDChart::AttributesModel::rowCount(), KDChart::AbstractDiagram::unitPrefix(), and KDChart::AbstractDiagram::unitSuffix().

void KDChart::AbstractDiagram::layoutChanged ( AbstractDiagram * ) [signal, inherited]

Diagrams are supposed to emit this signal, when the layout of one of their element changes.

Layouts can change, for example, when axes are added or removed, or when the configuration was changed in a way that the axes or the diagram itself are displayed in a different geometry. Changes in the diagrams coordinate system also result in the layoutChanged() signal being emitted.

Referenced by KDChart::AbstractDiagram::setDatasetDimensionInternal(), KDChart::LeveyJenningsDiagram::setModel(), KDChart::AbstractDiagram::setModel(), KDChart::BarDiagram::setOrientation(), KDChart::AbstractPieDiagram::setPieAttributes(), KDChart::BarDiagram::setThreeDBarAttributes(), KDChart::AbstractPieDiagram::setThreeDPieAttributes(), KDChart::Plotter::setType(), KDChart::LineDiagram::setType(), and KDChart::BarDiagram::setType().

void KDChart::AbstractDiagram::modelDataChanged ( ) [signal, inherited]

This signal is emitted, when the model data is changed.

Referenced by KDChart::AbstractDiagram::setModel().

void KDChart::AbstractDiagram::modelsChanged ( ) [signal, inherited]

This signal is emitted, when either the model or the AttributesModel is replaced.

Referenced by KDChart::AbstractDiagram::setAttributesModel(), KDChart::AbstractDiagram::setModel(), and KDChart::AbstractDiagram::setSelectionModel().

QModelIndex AbstractDiagram::moveCursor	(	CursorAction	cursorAction,
		Qt::KeyboardModifiers	modifiers
	)		`[virtual, inherited]`

[reimplemented]

Definition at line 907 of file KDChartAbstractDiagram.cpp.

virtual double KDChart::AbstractPolarDiagram::numberOfDatasets ( ) const [virtual, inherited]

Reimplemented in KDChart::RingDiagram.

Definition at line 49 of file KDChartAbstractPolarDiagram.h.

Referenced by KDChart::AbstractPolarDiagram::rowCount().

double PolarDiagram::numberOfGridRings ( ) const [virtual]

[reimplemented]

Implements KDChart::AbstractPolarDiagram.

Definition at line 252 of file KDChartPolarDiagram.cpp.

double PolarDiagram::numberOfValuesPerDataset ( ) const [virtual]

[reimplemented]

Implements KDChart::AbstractPolarDiagram.

Definition at line 246 of file KDChartPolarDiagram.cpp.

void PolarDiagram::paint	(	PaintContext *	paintContext,
		bool	calculateListAndReturnScale,
		qreal &	newZoomX,
		qreal &	newZoomY
	)		`[virtual]`

Definition at line 147 of file KDChartPolarDiagram.cpp.

References KDChart::AbstractDiagram::brush(), KDChart::Position::Center, KDChart::AbstractDiagram::checkInvariants(), closeDatasets(), KDChart::AbstractDiagram::coordinatePlane(), d, KDChart::DatasetBrushRole, KDChart::AbstractCoordinatePlane::geometry(), KDChart::PaintContext::painter(), KDChart::PaintContext::rectangle(), KDChart::AbstractPolarDiagram::rowCount(), KDChart::PrintingParameters::scalePen(), KDChart::AbstractCoordinatePlane::translate(), KDChart::AbstractCoordinatePlane::zoomFactorX(), and KDChart::AbstractCoordinatePlane::zoomFactorY().

void PolarDiagram::paint ( PaintContext * paintContext ) [protected, virtual]

[reimplemented]

Implements KDChart::AbstractDiagram.

Definition at line 140 of file KDChartPolarDiagram.cpp.

Referenced by KDChart::PolarCoordinatePlane::paint(), and paintEvent().

void AbstractDiagram::paintDataValueText	(	QPainter *	painter,
		const QModelIndex &	index,
		const QPointF &	pos,
		double	value
	)		`[inherited]`

Definition at line 519 of file KDChartAbstractDiagram.cpp.

References d.

Referenced by KDChart::AbstractDiagram::paintDataValueTexts().

void AbstractDiagram::paintDataValueTexts ( QPainter * painter ) [protected, virtual, inherited]

Deprecated:: This method is deprecated and provided for backward-compatibility only.

Your own diagram classes should call d->paintDataValueTextsAndMarkers() instead which also is taking care for showing your cell-specific comments, if any,

Definition at line 535 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::checkInvariants(), KDChart::AbstractDiagram::coordinatePlane(), d, KDChart::AbstractDiagram::datasetDimension(), KDChart::AbstractDiagram::paintDataValueText(), and KDChart::AbstractCoordinatePlane::translate().

void PolarDiagram::paintEvent ( QPaintEvent * ) [protected]

Definition at line 120 of file KDChartPolarDiagram.cpp.

References paint(), KDChart::PaintContext::setPainter(), and KDChart::PaintContext::setRectangle().

void AbstractDiagram::paintMarker	(	QPainter *	painter,
		const MarkerAttributes &	markerAttributes,
		const QBrush &	brush,
		const QPen &	pen,
		const QPointF &	point,
		const QSizeF &	size
	)		`[virtual, inherited]`

Definition at line 588 of file KDChartAbstractDiagram.cpp.

References KDChart::MarkerAttributes::Marker1Pixel, KDChart::MarkerAttributes::Marker4Pixels, KDChart::MarkerAttributes::MarkerCircle, KDChart::MarkerAttributes::MarkerCross, KDChart::MarkerAttributes::MarkerDiamond, KDChart::MarkerAttributes::MarkerFastCross, KDChart::MarkerAttributes::MarkerRing, KDChart::MarkerAttributes::MarkerSquare, KDChart::MarkerAttributes::markerStyle(), KDChart::MarkerAttributes::NoMarker, and KDChart::PrintingParameters::scalePen().

Referenced by KDChart::TernaryPointDiagram::paint(), KDChart::TernaryLineDiagram::paint(), KDChart::MarkerLayoutItem::paintIntoRect(), KDChart::AbstractDiagram::paintMarker(), and KDChart::AbstractDiagram::paintMarkers().

void AbstractDiagram::paintMarker	(	QPainter *	painter,
		const DataValueAttributes &	a,
		const QModelIndex &	index,
		const QPointF &	pos
	)		`[inherited]`

Definition at line 552 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::brush(), KDChart::AbstractDiagram::checkInvariants(), d, KDChart::MarkerAttributes::isVisible(), KDChart::DataValueAttributes::isVisible(), KDChart::DataValueAttributes::markerAttributes(), KDChart::MarkerAttributes::markerColor(), KDChart::MarkerAttributes::markerSize(), KDChart::AbstractDiagram::paintMarker(), and KDChart::MarkerAttributes::pen().

void AbstractDiagram::paintMarker	(	QPainter *	painter,
		const QModelIndex &	index,
		const QPointF &	pos
	)		`[inherited]`

Definition at line 580 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::checkInvariants(), KDChart::AbstractDiagram::dataValueAttributes(), and KDChart::AbstractDiagram::paintMarker().

void AbstractDiagram::paintMarkers ( QPainter * painter ) [protected, virtual, inherited]

Deprecated:: This method is deprecated and provided for backward-compatibility only.

Your own diagram classes should call d->paintDataValueTextsAndMarkers() instead which also is taking care for showing your cell-specific comments, if any,

Definition at line 708 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::checkInvariants(), KDChart::AbstractDiagram::coordinatePlane(), KDChart::AbstractDiagram::datasetDimension(), KDChart::AbstractDiagram::paintMarker(), and KDChart::AbstractCoordinatePlane::translate().

void PolarDiagram::paintPolarMarkers	(	PaintContext *	ctx,
		const QPolygonF &	polygon
	)		`[protected, virtual]`

Definition at line 133 of file KDChartPolarDiagram.cpp.

QPen AbstractDiagram::pen ( int dataset ) const [inherited]

Retrieve the pen to be used for the given dataset.

This will fall back automatically to what was set at model level, if there are no dataset specific settings.

Parameters:

dataset The dataset to retrieve the pen for.

Returns:: The pen to use for painting.

Definition at line 751 of file KDChartAbstractDiagram.cpp.

References d, KDChart::DatasetPenRole, and KDChart::AbstractDiagram::pen().

QPen AbstractDiagram::pen ( const QModelIndex & index ) const [inherited]

Retrieve the pen to be used, for painting the datapoint at the given index in the model.

Parameters:

index The index of the datapoint in the model. With a dataset dimension of two, this is the index of the key of each key/value pair.

Returns:: The pen to use for painting.

Definition at line 759 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::AttributesModel::data(), and KDChart::DatasetPenRole.

QPen AbstractDiagram::pen ( ) const [inherited]

Retrieve the pen to be used for painting datapoints globally.

This will fall back automatically to the default settings, if there are no specific settings.

Returns:: The pen to use for painting.

Definition at line 745 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::AttributesModel::data(), and KDChart::DatasetPenRole.

Referenced by KDChart::AbstractDiagram::datasetPens(), KDChart::TernaryPointDiagram::paint(), KDChart::TernaryLineDiagram::paint(), KDChart::LeveyJenningsDiagram::paint(), KDChart::AbstractDiagram::pen(), and KDChart::LeveyJenningsDiagram::setScanLinePen().

bool AbstractDiagram::percentMode ( ) const [inherited]

Returns whether this diagram is drawn in percent mode.

If true, all data points in the same column of a diagram will be be drawn at the same X coordinate and stacked up so that the distance from the last data point (or the zero line) to a data point P is always the ratio of (Y-Value of P)/ (sum of all Y-Values in same column as P) relative to the diagrams height (or width, if abscissa and ordinate are swapped).

Note that this property is not applicable to all diagram types.

Definition at line 513 of file KDChartAbstractDiagram.cpp.

References d.

Referenced by KDChart::AbstractDiagram::compare().

const PolarCoordinatePlane * AbstractPolarDiagram::polarCoordinatePlane ( ) const [inherited]

Definition at line 52 of file KDChartAbstractPolarDiagram.cpp.

References KDChart::AbstractDiagram::coordinatePlane().

Referenced by KDChart::RingDiagram::paint(), and KDChart::PieDiagram::paintInternal().

void KDChart::AbstractDiagram::propertiesChanged ( ) [signal, inherited]

Emitted upon change of a property of the Diagram.

Referenced by KDChart::Plotter::resetLineAttributes(), KDChart::LineDiagram::resetLineAttributes(), KDChart::AbstractDiagram::setAllowOverlappingDataValueTexts(), KDChart::AbstractDiagram::setAntiAliasing(), KDChart::BarDiagram::setBarAttributes(), KDChart::AbstractDiagram::setBrush(), KDChart::LineDiagram::setCenterDataPoints(), KDChart::AbstractDiagram::setDataValueAttributes(), KDChart::Plotter::setLineAttributes(), KDChart::LineDiagram::setLineAttributes(), KDChart::BarDiagram::setOrientation(), KDChart::AbstractDiagram::setPen(), KDChart::AbstractDiagram::setPercentMode(), KDChart::BarDiagram::setThreeDBarAttributes(), KDChart::Plotter::setThreeDLineAttributes(), KDChart::LineDiagram::setThreeDLineAttributes(), KDChart::Plotter::setType(), KDChart::LineDiagram::setType(), KDChart::BarDiagram::setType(), KDChart::Plotter::setValueTrackerAttributes(), and KDChart::LineDiagram::setValueTrackerAttributes().

void PolarDiagram::resize ( const QSizeF & area ) [virtual]

[reimplemented]

Implements KDChart::AbstractDiagram.

Definition at line 235 of file KDChartPolarDiagram.cpp.

void PolarDiagram::resizeEvent ( QResizeEvent * ) [protected]

Definition at line 129 of file KDChartPolarDiagram.cpp.

bool PolarDiagram::rotateCircularLabels ( ) const

Definition at line 274 of file KDChartPolarDiagram.cpp.

References d.

Referenced by clone(), and setRotateCircularLabels().

int AbstractPolarDiagram::rowCount ( ) const [inherited]

Definition at line 62 of file KDChartAbstractPolarDiagram.cpp.

References KDChart::AbstractPolarDiagram::numberOfDatasets().

Referenced by KDChart::RingDiagram::calculateDataBoundaries(), calculateDataBoundaries(), KDChart::RingDiagram::paint(), paint(), and KDChart::RingDiagram::valueTotals().

void AbstractDiagram::scrollTo	(	const QModelIndex &	index,
		ScrollHint	hint = `EnsureVisible`
	)		`[virtual, inherited]`

[reimplemented]

Definition at line 902 of file KDChartAbstractDiagram.cpp.

void AbstractDiagram::setAllowOverlappingDataValueTexts ( bool allow ) [inherited]

Set whether data value labels are allowed to overlap.

Parameters:

allow True means that overlapping labels are allowed.

Definition at line 485 of file KDChartAbstractDiagram.cpp.

References d, and KDChart::AbstractDiagram::propertiesChanged().

void AbstractDiagram::setAntiAliasing ( bool enabled ) [inherited]

Set whether anti-aliasing is to be used while rendering this diagram.

Parameters:

enabled True means that AA is enabled.

Definition at line 496 of file KDChartAbstractDiagram.cpp.

References d, and KDChart::AbstractDiagram::propertiesChanged().

void AbstractDiagram::setAttributesModel ( AttributesModel * amodel ) [virtual, inherited]

Associate an AttributesModel with this diagram.

Note that the diagram does _not_ take ownership of the AttributesModel. This should thus only be used with AttributesModels that have been explicitly created by the user, and are owned by her. Setting an AttributesModel that is internal to another diagram is an error.

Correct:

 AttributesModel *am = new AttributesModel( model, 0 );
 diagram1->setAttributesModel( am );
 diagram2->setAttributesModel( am );

Wrong:

 diagram1->setAttributesModel( diagram2->attributesModel() );

Parameters:

model The AttributesModel to use for this diagram.

See also:: AttributesModel, usesExternalAttributesModel

Sets an external AttributesModel on this diagram. By default, a diagram has it's own internal set of attributes, but an external one can be set. This can be used to share attributes between several diagrams. The diagram does not take ownership of the attributesmodel.

Reimplemented in KDChart::AbstractCartesianDiagram.

Definition at line 292 of file KDChartAbstractDiagram.cpp.

References d, KDChart::AbstractDiagram::modelsChanged(), and KDChart::AbstractDiagram::setDataBoundariesDirty().

void AbstractDiagram::setAttributesModelRootIndex ( const QModelIndex & idx ) [protected, inherited]

Definition at line 338 of file KDChartAbstractDiagram.cpp.

References d, and KDChart::AbstractDiagram::setDataBoundariesDirty().

Referenced by KDChart::AbstractDiagram::setRootIndex().

void AbstractDiagram::setBrush	(	const QModelIndex &	index,
		const QBrush &	brush
	)		`[inherited]`

Set the brush to be used, for painting the datapoint at the given index.

Parameters:

index	The datapoint's index in the model. With a dataset dimension of two, this is the index of the key of each key/value pair.
brush	The brush to use.

Definition at line 767 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::DatasetBrushRole, KDChart::AbstractDiagram::propertiesChanged(), and KDChart::AttributesModel::setData().

void AbstractDiagram::setBrush ( const QBrush & brush ) [inherited]

Set the brush to be used, for painting all datasets in the model.

Parameters:

brush The brush to use.

Definition at line 775 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::DatasetBrushRole, KDChart::AbstractDiagram::propertiesChanged(), and KDChart::AttributesModel::setModelData().

void AbstractDiagram::setBrush	(	int	dataset,
		const QBrush &	brush
	)		`[inherited]`

Set the brush to be used, for painting the given dataset.

Parameters:

dataset	The dataset to set the brush for.
brush	The brush to use.

Definition at line 782 of file KDChartAbstractDiagram.cpp.

References d, KDChart::DatasetBrushRole, and KDChart::AbstractDiagram::propertiesChanged().

void PolarDiagram::setCloseDatasets ( bool closeDatasets )

Close each of the data series by connecting the last point to its respective start point.

Definition at line 279 of file KDChartPolarDiagram.cpp.

References closeDatasets(), and d.

void AbstractDiagram::setCoordinatePlane ( AbstractCoordinatePlane * plane ) [virtual, inherited]

Set the coordinate plane associated with the diagram.

This determines how coordinates in value space are mapped into pixel space. The chart takes ownership.

Returns:: The coordinate plane associated with the diagram.

Reimplemented in KDChart::AbstractCartesianDiagram.

Definition at line 354 of file KDChartAbstractDiagram.cpp.

References d.

Referenced by KDChart::AbstractCoordinatePlane::addDiagram(), and KDChart::AbstractCoordinatePlane::takeDiagram().

void AbstractDiagram::setDataBoundariesDirty ( ) const [protected, slot, inherited]

Definition at line 234 of file KDChartAbstractDiagram.cpp.

References d, and KDChart::AbstractDiagram::update().

Referenced by KDChart::AbstractDiagram::dataChanged(), KDChart::Plotter::resize(), KDChart::LineDiagram::resize(), KDChart::BarDiagram::resize(), KDChart::AbstractDiagram::setAttributesModel(), KDChart::AbstractDiagram::setAttributesModelRootIndex(), KDChart::AbstractDiagram::setDatasetDimensionInternal(), KDChart::AbstractDiagram::setModel(), KDChart::BarDiagram::setOrientation(), KDChart::BarDiagram::setThreeDBarAttributes(), KDChart::Plotter::setThreeDLineAttributes(), KDChart::LineDiagram::setThreeDLineAttributes(), KDChart::Plotter::setType(), KDChart::LineDiagram::setType(), and KDChart::BarDiagram::setType().

void AbstractDiagram::setDatasetDimension ( int dimension ) [inherited]

Deprecated:

Sets the dataset dimension of the diagram. Using this method is deprecated. Use the specific diagram types instead.

Definition at line 1046 of file KDChartAbstractDiagram.cpp.

void AbstractDiagram::setDatasetDimensionInternal ( int dimension ) [protected, inherited]

Definition at line 1052 of file KDChartAbstractDiagram.cpp.

References d, KDChart::AbstractDiagram::layoutChanged(), and KDChart::AbstractDiagram::setDataBoundariesDirty().

Referenced by KDChart::TernaryLineDiagram::TernaryLineDiagram(), and KDChart::TernaryPointDiagram::TernaryPointDiagram().

void AbstractDiagram::setDataValueAttributes	(	int	dataset,
		const DataValueAttributes &	a
	)		`[inherited]`

Set the DataValueAttributes for the given dataset.

Parameters:

dataset	The dataset to set the attributes for.
a	The attributes to set.

Definition at line 439 of file KDChartAbstractDiagram.cpp.

References d, KDChart::DataValueLabelAttributesRole, and KDChart::AbstractDiagram::propertiesChanged().

void AbstractDiagram::setDataValueAttributes	(	const QModelIndex &	index,
		const DataValueAttributes &	a
	)		`[inherited]`

Set the DataValueAttributes for the given index.

Parameters:

index	The datapoint to set the attributes for. With a dataset dimension of two, this is the index of the key of each key/value pair.
a	The attributes to set.

Definition at line 428 of file KDChartAbstractDiagram.cpp.

References d, KDChart::DataValueLabelAttributesRole, and KDChart::AbstractDiagram::propertiesChanged().

void AbstractDiagram::setDataValueAttributes ( const DataValueAttributes & a ) [inherited]

Set the DataValueAttributes for all datapoints in the model.

Parameters:

a	The attributes to set.

Definition at line 479 of file KDChartAbstractDiagram.cpp.

References d, KDChart::DataValueLabelAttributesRole, and KDChart::AbstractDiagram::propertiesChanged().

void AbstractDiagram::setHidden ( bool hidden ) [inherited]

Hide (or unhide, resp.) all datapoints in the model.

Note:: Hidden data are still taken into account by the coordinate plane, so neither the grid nor your axes' ranges will change, when you hide data. For totally removing data from KD Chart's view you can use another approach: e.g. you could define a proxy model on top of your data model, and register the proxy model calling setModel() instead of registering your real data model.

Parameters:

hidden The hidden status to set.

Definition at line 397 of file KDChartAbstractDiagram.cpp.

References d, KDChart::AbstractDiagram::dataHidden(), and KDChart::DataHiddenRole.

void AbstractDiagram::setHidden	(	const QModelIndex &	index,
		bool	hidden
	)		`[inherited]`

Hide (or unhide, resp.) a data cell.

Note:: Hidden data are still taken into account by the coordinate plane, so neither the grid nor your axes' ranges will change, when you hide data. For totally removing data from KD Chart's view you can use another approach: e.g. you could define a proxy model on top of your data model, and register the proxy model calling setModel() instead of registering your real data model.

Parameters:

index	The datapoint to set the hidden status for. With a dataset dimension of two, this is the index of the key of each key/value pair.
hidden	The hidden status to set.

Definition at line 379 of file KDChartAbstractDiagram.cpp.

References d, KDChart::AbstractDiagram::dataHidden(), and KDChart::DataHiddenRole.

void AbstractDiagram::setHidden	(	int	dataset,
		bool	hidden
	)		`[inherited]`

Hide (or unhide, resp.) a dataset.

Note:: Hidden data are still taken into account by the coordinate plane, so neither the grid nor your axes' ranges will change, when you hide data. For totally removing data from KD Chart's view you can use another approach: e.g. you could define a proxy model on top of your data model, and register the proxy model calling setModel() instead of registering your real data model.

Parameters:

dataset	The dataset to set the hidden status for.
hidden	The hidden status to set.

Definition at line 388 of file KDChartAbstractDiagram.cpp.

References d, KDChart::AbstractDiagram::dataHidden(), and KDChart::DataHiddenRole.

void AbstractDiagram::setModel ( QAbstractItemModel * model ) [virtual, inherited]

Associate a model with the diagram.

Reimplemented in KDChart::AbstractCartesianDiagram, and KDChart::LeveyJenningsDiagram.

Definition at line 240 of file KDChartAbstractDiagram.cpp.

References d, KDChart::AbstractDiagram::dataChanged(), KDChart::AttributesModel::initFrom(), KDChart::AbstractDiagram::layoutChanged(), KDChart::AbstractDiagram::modelDataChanged(), KDChart::AbstractDiagram::modelsChanged(), and KDChart::AbstractDiagram::setDataBoundariesDirty().

Referenced by KDChart::Widget::setType().

void AbstractDiagram::setPen ( const QPen & pen ) [inherited]

Set the pen to be used, for painting all datasets in the model.

Parameters:

pen	The pen to use.

Definition at line 732 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::DatasetPenRole, KDChart::AbstractDiagram::propertiesChanged(), and KDChart::AttributesModel::setModelData().

void AbstractDiagram::setPen	(	const QModelIndex &	index,
		const QPen &	pen
	)		`[inherited]`

Set the pen to be used, for painting the datapoint at the given index.

Parameters:

index	The datapoint's index in the model. With a dataset dimension of two, this is the index of the key of each key/value pair.
pen	The pen to use.

Definition at line 724 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModel(), KDChart::DatasetPenRole, KDChart::AbstractDiagram::propertiesChanged(), and KDChart::AttributesModel::setData().

void AbstractDiagram::setPen	(	int	dataset,
		const QPen &	pen
	)		`[inherited]`

Set the pen to be used, for painting the given dataset.

Parameters:

dataset	The dataset to set the pen for.
pen	The pen to use.

Definition at line 739 of file KDChartAbstractDiagram.cpp.

References d, KDChart::DatasetPenRole, and KDChart::AbstractDiagram::propertiesChanged().

void AbstractDiagram::setPercentMode ( bool percent ) [inherited]

Deprecated method that turns the percent mode of this diagram on or off.

Deprecated:

This method is deprecated. Use the setType() method of a supporting diagram implementation instead, e.g. BarDiagram::setType().

See also:: percentMode

Definition at line 507 of file KDChartAbstractDiagram.cpp.

References d, and KDChart::AbstractDiagram::propertiesChanged().

Referenced by KDChart::BarDiagram::setOrientation(), KDChart::LineDiagram::setType(), and KDChart::BarDiagram::setType().

void AbstractDiagram::setRootIndex ( const QModelIndex & idx ) [virtual, inherited]

Set the root index in the model, where the diagram starts referencing data for display.

[reimplemented]

Reimplemented in KDChart::AbstractCartesianDiagram.

Definition at line 331 of file KDChartAbstractDiagram.cpp.

References d, and KDChart::AbstractDiagram::setAttributesModelRootIndex().

void PolarDiagram::setRotateCircularLabels ( bool rotateCircularLabels )

Definition at line 269 of file KDChartPolarDiagram.cpp.

References d, and rotateCircularLabels().

void AbstractDiagram::setSelection	(	const QRect &	rect,
		QItemSelectionModel::SelectionFlags	command
	)		`[virtual, inherited]`

[reimplemented]

Definition at line 919 of file KDChartAbstractDiagram.cpp.

References d.

void AbstractDiagram::setSelectionModel ( QItemSelectionModel * selectionModel ) [virtual, inherited]

Associate a seleection model with the diagrom.

Definition at line 271 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::modelsChanged().

void PolarDiagram::setShowDelimitersAtPosition	(	Position	position,
		bool	showDelimiters
	)

Definition at line 289 of file KDChartPolarDiagram.cpp.

References d, and KDChart::Position::value().

void PolarDiagram::setShowLabelsAtPosition	(	Position	position,
		bool	showLabels
	)

Definition at line 295 of file KDChartPolarDiagram.cpp.

References d, and KDChart::Position::value().

void AbstractDiagram::setUnitPrefix	(	const QString &	prefix,
		Qt::Orientation	orientation
	)		`[inherited]`

Set the unit prefix to be used on axes for all columns.

Sets the unit prefix for all values.

Parameters:

prefix	The prefix to be used.
orientation	The orientation of the axis to use.
prefix	the prefix to be set
orientation	the orientantion of the axis to set

Definition at line 824 of file KDChartAbstractDiagram.cpp.

References d.

void AbstractDiagram::setUnitPrefix	(	const QString &	prefix,
		int	column,
		Qt::Orientation	orientation
	)		`[inherited]`

Set the unit prefix to be used on axes for one specific column.

Sets the unit prefix for one value.

Parameters:

prefix	The prefix to be used.
column	The column which should be set.
orientation	The orientation of the axis to use.
prefix	the prefix to be set
column	the value using that prefix
orientation	the orientantion of the axis to set

Definition at line 814 of file KDChartAbstractDiagram.cpp.

References d.

void AbstractDiagram::setUnitSuffix	(	const QString &	suffix,
		Qt::Orientation	orientation
	)		`[inherited]`

Set the unit prefix to be used on axes for all columns.

Sets the unit suffix for all values.

Parameters:

suffix	The suffix to be used.
orientation	The orientation of the axis to use.
suffix	the suffix to be set
orientation	the orientantion of the axis to set

Definition at line 845 of file KDChartAbstractDiagram.cpp.

References d.

void AbstractDiagram::setUnitSuffix	(	const QString &	suffix,
		int	column,
		Qt::Orientation	orientation
	)		`[inherited]`

Set the unit prefix to be used on axes for one specific column.

Sets the unit suffix for one value.

Parameters:

suffix	The suffix to be used.
column	The column which should be set.
orientation	The orientation of the axis to use.
suffix	the suffix to be set
column	the value using that suffix
orientation	the orientantion of the axis to set

Definition at line 835 of file KDChartAbstractDiagram.cpp.

References d.

void PolarDiagram::setZeroDegreePosition ( int degrees )

Deprecated:: Use PolarCoordinatePlane::setStartPosition( qreal degrees ) instead.

Definition at line 257 of file KDChartPolarDiagram.cpp.

bool PolarDiagram::showDelimitersAtPosition ( Position position ) const

Definition at line 301 of file KDChartPolarDiagram.cpp.

References d, and KDChart::Position::value().

Referenced by clone().

bool PolarDiagram::showLabelsAtPosition ( Position position ) const

Definition at line 306 of file KDChartPolarDiagram.cpp.

References d, and KDChart::Position::value().

Referenced by clone().

QString AbstractDiagram::unitPrefix ( Qt::Orientation orientation ) const [inherited]

Retrieves the axis unit prefix.

Returns the global unit prefix.

Parameters:

orientation The orientation of the axis.

Returns:: The axis unit prefix.

Parameters:

orientation the orientation of the axis

Returns:: the unit prefix

Definition at line 868 of file KDChartAbstractDiagram.cpp.

References d.

QString AbstractDiagram::unitPrefix	(	int	column,
		Qt::Orientation	orientation,
		bool	fallback = `false`
	)		const `[inherited]`

Retrieves the axis unit prefix for a specific column.

Returns the unit prefix for a special value.

Parameters:

column	The column whose prefix should be retrieved.
orientation	The orientation of the axis.
fallback	If true, the prefix for all columns is returned, when none is set for the selected column.

Returns:: The axis unit prefix.

Parameters:

column	the value which's prefix is requested
orientation	the orientation of the axis
fallback	if true, the global prefix is return when no specific one is set for that value

Returns:: the unit prefix

Definition at line 857 of file KDChartAbstractDiagram.cpp.

References d.

Referenced by KDChart::AbstractDiagram::itemRowLabels(), and KDChart::CartesianAxis::paintCtx().

QString AbstractDiagram::unitSuffix	(	int	column,
		Qt::Orientation	orientation,
		bool	fallback = `false`
	)		const `[inherited]`

Retrieves the axis unit suffix for a specific column.

Returns the unit suffix for a special value.

Parameters:

column	The column whose prefix should be retrieved.
orientation	The orientation of the axis.
fallback	If true, the suffix for all columns is returned, when none is set for the selected column.

Returns:: The axis unit suffix.

Parameters:

column	the value which's suffix is requested
orientation	the orientation of the axis
fallback	if true, the global suffix is return when no specific one is set for that value

Returns:: the unit suffix

Definition at line 880 of file KDChartAbstractDiagram.cpp.

References d.

Referenced by KDChart::AbstractDiagram::itemRowLabels(), and KDChart::CartesianAxis::paintCtx().

QString AbstractDiagram::unitSuffix ( Qt::Orientation orientation ) const [inherited]

Retrieves the axis unit suffix.

Returns the global unit suffix.

Parameters:

orientation The orientation of the axis.

Returns:: The axis unit suffix.

Parameters:

orientation the orientation of the axis

Returns:: the unit siffix

Definition at line 891 of file KDChartAbstractDiagram.cpp.

References d.

void AbstractDiagram::update ( ) const [inherited]

Definition at line 1068 of file KDChartAbstractDiagram.cpp.

References d.

void KDChart::AbstractDiagram::useDefaultColors ( ) [inherited]

Set the palette to be used, for painting datasets to the default palette.

See also:: KDChart::Palette. FIXME: fold into one usePalette (KDChart::Palette&) method

Definition at line 946 of file KDChartAbstractDiagram.cpp.

References d, and KDChart::AttributesModel::PaletteTypeDefault.

void KDChart::AbstractDiagram::useRainbowColors ( ) [inherited]

Set the palette to be used, for painting datasets to the rainbow palette.

See also:: KDChart::Palette.

Definition at line 956 of file KDChartAbstractDiagram.cpp.

References d, and KDChart::AttributesModel::PaletteTypeRainbow.

bool AbstractDiagram::usesExternalAttributesModel ( ) const [virtual, inherited]

Returns whether the diagram is using its own built-in attributes model or an attributes model that was set via setAttributesModel.

See also:: setAttributesModel

Definition at line 311 of file KDChartAbstractDiagram.cpp.

References d.

void KDChart::AbstractDiagram::useSubduedColors ( ) [inherited]

Set the palette to be used, for painting datasets to the subdued palette.

See also:: KDChart::Palette.

Definition at line 951 of file KDChartAbstractDiagram.cpp.

References d, and KDChart::AttributesModel::PaletteTypeSubdued.

double AbstractDiagram::valueForCell	(	int	row,
		int	column
	)		const `[protected, inherited]`

Helper method, retrieving the data value (DisplayRole) for a given row and column.

Parameters:

row	The row to query.
column	The column to query.

Returns:: The value of the display role at the given row and column as a double.

Deprecated:

Definition at line 1062 of file KDChartAbstractDiagram.cpp.

References KDChart::AbstractDiagram::attributesModelRootIndex(), and d.

double PolarDiagram::valueTotals ( ) const [virtual]

[reimplemented]

Implements KDChart::AbstractPolarDiagram.

Definition at line 240 of file KDChartPolarDiagram.cpp.

int AbstractDiagram::verticalOffset ( ) const [virtual, inherited]

[reimplemented]

Definition at line 913 of file KDChartAbstractDiagram.cpp.

void KDChart::AbstractDiagram::viewportCoordinateSystemChanged ( ) [signal, inherited]

Emitted upon change of the view coordinate system.

Referenced by KDChart::AbstractCartesianDiagram::setCoordinatePlane().

QRect AbstractDiagram::visualRect ( const QModelIndex & index ) const [virtual, inherited]

[reimplemented]

Definition at line 897 of file KDChartAbstractDiagram.cpp.

References d.

QRegion AbstractDiagram::visualRegion ( const QModelIndex & index ) const [virtual, inherited]

Definition at line 940 of file KDChartAbstractDiagram.cpp.

References d.

QRegion AbstractDiagram::visualRegionForSelection ( const QItemSelection & selection ) const [virtual, inherited]

[reimplemented]

Definition at line 930 of file KDChartAbstractDiagram.cpp.

References d.

int PolarDiagram::zeroDegreePosition ( ) const

Deprecated:: Use qreal PolarCoordinatePlane::startPosition instead.

Definition at line 263 of file KDChartPolarDiagram.cpp.

The documentation for this class was generated from the following files:

KDChart::PolarDiagram Class Reference

Signals

Public Member Functions

Protected Slots

Protected Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation